⚠️ Important Notice


Your IP address and browser information will be recorded as proof of this acknowledgement. This data is retained for 12 months.

MGB B-series engine oil leak from rear main seal — MG GHN/GHD (1962–1980) | MyCarFault
🚗 Classic Fault — MG GHN/GHD (1962–1980)

MGB B-series engine oil leak from rear main seal

🟢 Solved Moderate 🏁 Original spec 6 hrs
Community fix rate — 28 confirmed fixes
78% success rate
💰 Estimated Repair Cost
$40 – $200 GBP
Parts and labour estimate
🔧 Tools Required
Engine partial removal, seal tools
📋 Overview

The BMC B-series engine uses a rope rear main seal that weeps oil chronically. A known and accepted characteristic.

🩺 Symptoms
🔍 Possible Causes
🛠️ Diagnosis Steps

Check PCV breather first. Rope seals weep on most high-mileage B-series — lip seal conversion is the permanent fix.

Most Confirmed Fix

Lip seal conversion kit replacement

78% of users confirm this fix worked (28 reports)

🔗 Other MG GHN/GHD Faults


Own a MG GHN/GHD?

Share your experience with this fault — or report a different issue. Your knowledge helps other classic car owners worldwide.

🔧
Usta
● Online