⚠️ Important Notice


Your IP address and browser information will be recorded as proof of this acknowledgement. This data is retained for 12 months.

W114 distributor contact breaker points wear — Mercedes-Benz (1968–1976) | MyCarFault
🚗 Classic Fault — Mercedes-Benz (1968–1976)

W114 distributor contact breaker points wear

🟢 Solved Beginner 🏁 Original spec 1 hr
Community fix rate — 34 confirmed fixes
91% success rate
💰 Estimated Repair Cost
$10 – $35 USD
Parts and labour estimate
🔧 Tools Required
Feeler gauges, dwell meter, timing light, screwdrivers
📋 Overview

Distributor contact breaker points develop pitting on the contact faces, causing inconsistent ignition timing and engine misfire.

🩺 Symptoms

Rough running and hesitation on acceleration. Difficult starting. Increased fuel consumption.

🔍 Possible Causes

Normal wear. Incorrect dwell angle. Oil contamination on points.

🛠️ Diagnosis Steps

Remove distributor cap and inspect points for pitting, burning, or incorrect gap.

Most Confirmed Fix

Replace points and condenser together. Set gap to 0.4mm. Check and adjust ignition timing.

91% of users confirm this fix worked (34 reports)

🔗 Other Mercedes-Benz Faults


Own a Mercedes-Benz ?

Share your experience with this fault — or report a different issue. Your knowledge helps other classic car owners worldwide.

🔧
Usta
● Online